Blinds are one of the most versatile window treatments, fulfilling several needs like light and privacy control apart from allowing us to adjust the outside views as per our preference. The best part about blinds is that they can be adjusted for sufficient privacy while simultaneously allowing in some amount of light during the day. At bedtime they can be closed for complete privacy and to block all incoming light so you can enjoy a night of deep and restful sleep.
Blinds made from certain materials like real wood even offer insulation which results in considerable energy efficiency and cost savings. And they look great too, instantly elevating any space!
But their charm is easily reversed even if functionality is off. These window treatments typically function well but at times they pose problems like broken slats, slats tilting to one side or being stuck in the up or down position. Thankfully there are easy fixes for all these problems, so there’s no reason to worry! And of course, if you would like help in resolving any challenge posed by your blinds, Budget Blinds is just a phone call away.
Budget Blinds has compiled a guide of some helpful tips for resolving some of the most commonly faced challenges with blinds. Are you ready for some quick fixes? Let’s get started then!
Guide to Fixing Broken Blinds
Some of the most commonly faced issues with blinds are: broken blinds, blinds that hang unevenly, blinds that won’t roll up, and many others. Regardless of the type of challenge your blinds are posing, here are some easy-breezy solutions:
Broken Slats
Fixing broken blind slats is comparatively easy as one can easily replace the individual slat instead of having to replace the entire window treatment. Follow the steps listed below to replace a slat:
- First remove the plugs located at the bottom of the rail. After removing the plugs, you’ll be able to see the knotted lift cord.
- Undo the knot of the lift cord and pull the cord from the front of the blind.
- Replace the broken slat and restring the lift cord through each slat in the new blind.
Slats Won’t Lower
Blinds can be easily pulled up to allow more light into the room. However, at times, they get stuck, making it difficult to lower them. This happens especially if the blinds are left in the rolled up position for an extended period. But there’s no reason to worry. This problem can be easily fixed by following the procedure listed below:
- Hold the lift cords level and gently pull it. This action should release the blinds’ locking mechanism.
- If step 1 doesn’t help release the lock, locate the pin and try to release it. You can release the pin by pushing it to disengage the locking mechanism on the cord, which is located in the headrail where the cord runs. Releasing the pin will release the blinds, lowering them immediately.
Blinds Won’t Lift
For maximum privacy and room darkening, blinds are often pulled down completely. But at times they get stuck and it gets difficult to lift them up. This problem especially occurs when the blinds have been left in the down position for a long duration. But fret not. It can be easily resolved by following a couple of simple steps enlisted below:
- Pull down on the bottom rail to reactivate the spring.
- The above action should help reset the spring which helps release the stuck up blinds and they can be lifted up easily.
Slats Won’t Tilt
Sometimes there’s a problem with the slats’ tilting mechanism. This happens when the tilt rod becomes disconnected from the tilt mechanism in the headrail due to handling in transit. Follow the following steps to resolve this issue:
- First, remove the blind from the window.
- Then examine the headrail and try to locate the metal rod that runs the length of the headrail. At this point, you should also be able to locate the tilt mechanism. Gently push the end of the tilt rod back into the space where the tilt mechanism is housed. For a more secure tilt positioning, it’s best to push the tilt rod through.
- Finally, you should be able to replace the blind.
Bottom of the Blinds Won’t Hang Evenly
At times the bottom of the blinds doesn’t hang evenly. This is caused by cords being caught in the headrail. This challenge can be easily tackled by performing the following step:
- Simply raise and lower the shades repeatedly until the bottom hangs evenly.
If you would like help in resolving any challenge posed by your blinds, all you have to do is you’re your local Budget Blinds. We would love to assist you!
Or if your blinds are beyond repair, consider replacing them with brand new window treatments from Budget Blinds, including motorized window coverings that are easier to operate. Schedule a complimentary in-home design consultation today to explore our latest offerings in shades, blinds, shutters, and draperies. We bring the showroom to you so you can browse in the comfort of your home and as per your convenience!
